Name: SL183038-TB-BR-C3 INA
Brand: INA

Especificações

Disponibilidade 2 unid.
Marca INA
Número do artigo SL183038-TB-BR-C3 INA
Manufacturer Part Number 0622728700030
EAN 4054366796899
Categoria Rolamento de rolos cilíndricos

Peso e dimensões

Interno (d) mm 190
Externo (D) mm 290
Largura (B) mm 75
Interno (d) polegadas 7.4803
Externo (D) polegadas 11.4173
Largura (B) polegadas 2.9528
Peso (kg) 17

Características do produto

Furo C - furo cilíndrico
Vedação Sem vedação
Tipo de gaiola FC - sem gaiola (full comnplement)
Modificação externa Sem modificação externa
Folga radial interna Folga radial interna C3 (maior que Cn)
Precisão BR - Black Finishing
Estabilização térmica Sem estabilização térmica - temperaturaa até 120 °C

Dados da Schaeffler (medias)

Número ECLASS 23-05-09-01
Número ECLASS2 23-05-09-01

Descrição do sufixo

TB In The Case Of Bearings Of TB Design, The Axial Load Carrying Capacity Of Cylindrical Roller Bearings Was Significantly Improved With The Aid Of New Calculation And Manufacturing Methods. Optimum Contact Conditions Between The Roller And Rib Are Ensured By Means Of A Special Curvature Of The Roller End Faces. As A Result, The Axial Contact Pressures On The Rib Are Significantly Minimised And A Lubricant Film Capable Of Supporting Higher Loads Is Formed. Under Normal Operating Conditions, Wear And Fatigue At The Rib Contact Running And Roller End Faces Is Completely Eliminated. In Addition, Axial Frictional Torque Is Reduced By Up To 50%. The Bearing Temperature During Operation Is Therefore Significantly Lower
BR Black Finished, Factory-Applied Durotect® B Black-Oxide Coating. Durotect B Improves Run-In Behavior And Energy Efficiency While Reducing Surface-Induced Damage To The Bearing, Burnished Race
C3 Internal Clearance Larger Than Normal

Transferências e Links

Link to manufacturer

Descrição do produto

The SL183038-TB-BR-C3 INA is a single-row, full-complement cylinder bearing. This bearing type has a solid outer and inner ring and a high number of cylindrical rollers. These rollers are guided between the ribs of the rings. Since there is no cage, the maximum number of rolls can be used. As a result, these bearings can support very high radial loads. However, the maximum speed is lower than the speed of cylindrical roller bearings with cages. Single-row full-complement cylindrical roller bearings can also support axial forces in one direction. They are used as support bearings. Support bearings allow axial displacement of the shaft relative to the housing in one direction. The shaft is located axially in the other direction.

SL183038-TB-BR-C3 INA

Single-row full-complement cylindrical roller bearing