Número do artigoSL1818/560-E-TB-N1-H167C-IR/T-CN/3L INA
CategoriaRolamento de rolos cilíndricos
Peso e dimensões
Interno (d) mm
560
Externo (D) mm
680
Largura (B) mm
56
Interno (d) polegadas
22.0472
Externo (D) polegadas
26.7717
Largura (B) polegadas
2.2047
Peso (kg)
39.9
Características do produto
Furo
C - furo cilíndrico
Vedação
Sem vedação
Tipo de gaiola
FC - sem gaiola (full comnplement)
Modificação externa
N1 - uma ranhura de fixação no anel externo
Folga radial interna
Lower Half Of C3 Range
Precisão
Precisão standard
Estabilização térmica
Sem estabilização térmica - temperaturaa até 120 °C
Descrição do sufixo
EIncreased Load Capacity
TBIn The Case Of Bearings Of TB Design, The Axial Load Carrying Capacity Of Cylindrical Roller Bearings Was Significantly Improved With The Aid Of New Calculation And Manufacturing Methods. Optimum Contact Conditions Between The Roller And Rib Are Ensured By Means Of A Special Curvature Of The Roller End Faces. As A Result, The Axial Contact Pressures On The Rib Are Significantly Minimised And A Lubricant Film Capable Of Supporting Higher Loads Is Formed. Under Normal Operating Conditions, Wear And Fatigue At The Rib Contact Running And Roller End Faces Is Completely Eliminated. In Addition, Axial Frictional Torque Is Reduced By Up To 50%. The Bearing Temperature During Operation Is Therefore Significantly Lower
N1One Locating Slot (Notch) In One Outer Ring Side Face Or Housing Washer
H167CAn Addition For A Specific Customer. Additional Requirements (Can Be Used As Standard)
IR/TGrooves In Inner Ring Are On The Side Of The Circlip
CN/3L
CNNormal Radial Internal Clearance
/3LClearance Range Corresponding To The Lower Half Of The Actual Clearance Range
Iniciar sessão
Bem-vindo, novamente! Pode iniciar sessão com a sua conta ABF.
