Pedidos feitos antes das 18h CET serão enviados hoje
Pagamento por fatura possível
Rastreie seu pedido com rastreamento
Distribuidor oficial da Schaeffler
A carregar equivalentes
Especificações
Disponibilidade8 unid.
MarcaFAG
Número do artigoNU2336EX.M1.C3.J30PC.W10B FAG
CategoriaRolamento de rolos cilíndricos
Peso e dimensões
Interno (d) mm
180
Externo (D) mm
380
Largura (B) mm
126
Interno (d) polegadas
7.0866
Externo (D) polegadas
14.9606
Largura (B) polegadas
4.9606
Peso (kg)
71.8
Características do produto
Furo
C - furo cilíndrico
Vedação
Sem vedação
Tipo de gaiola
M - gaiola de latão
Modificação externa
Sem modificação externa
Folga radial interna
Folga radial interna C3 (maior que Cn)
Precisão
Durotect B Coating
Estabilização térmica
Sem estabilização térmica - temperaturaa até 120 °C
Descrição do sufixo
EXIncreased Capacity Design, Design Modified In Accordance With Standard (Parts From These Bearings Must Not Be Interchanged With Parts From Bearings Of The Same Size Of The Previous Design E)
M1Solid Brass Cage, Two Piece, Roller Guided
C3Internal Clearance Larger Than Normal
J30PCRings And Rolling Elements With Black Oxide Coating (Durotect B)
W10BBearing Rings And Rolling Elements Of Through Hardening Rolling Bearing Steel Isotemp Heat Treated.(W10B Replaces Z43B)
Descrição do produto
The NU2336EX.M1.C3.J30PC.W10B FAG is a single-row cylindrical roller bearing with cage. This bearing consists of a solid inner and outer ring with cylindrical rollers in a cage. This cage prevents contact between the cylinder rollers, so this bearing type can support higher speeds than full-complement cylinder roller bearings. Also, single-row cylindrical roller bearings with cages are very rigid and they can take high radial forces. As the inner and outer rings of these bearings can be easily disassembled, they are very easy to install. Applications of single-row cylindrical roller bearings include gearboxes, agricultural machinery, pumps, compressors, and electric motors.
The NU2336EX.M1.C3.J30PC.W10B FAG is a single-row cylindrical bearing with NU design. The outer ring of this bearing has two rigid ribs, while the inner ring has none. As a result, NU bearings are only capable of supporting radial forces. This bearing type is commonly used as a floating bearing. Floating bearings allow axial displacement of the shaft relative to the housing in both directions. This is necessary in applications where the shaft material shrinks or expands due to temperature changes (thermal expansion). NU bearings can also be used as support bearings by combining them with HJ angle rings (available separately). Support bearings can support radial forces and also axial forces in a single direction.
Iniciar sessão
Bem-vindo, novamente! Pode iniciar sessão com a sua conta ABF.
