Também conhecido como
NU2324ECML/C4
NU2324-E-XL-M1-C4
EAN7316574588251
CategoriaRolamento de rolos cilíndricos
Peso e dimensões
Interno (d) mm
120
Externo (D) mm
260
Largura (B) mm
86
Interno (d) polegadas
4.7244
Externo (D) polegadas
10.2362
Largura (B) polegadas
3.3858
Peso (kg)
23.5
Características do produto
Furo
C - furo cilíndrico
Vedação
Sem vedação
Tipo de gaiola
ML - gaiola de latão, centrada no anel interno ou externo (dependendo do tamanho do rolamento)
Modificação externa
Sem modificação externa
Folga radial interna
Folga radial interna C4 (maior que C3)
Precisão
Bearings for Traction Motors
Estabilização térmica
Sem estabilização térmica - temperaturaa até 120 °C
Descrição do sufixo
ECOptimized Internal Design Incorporating More And/Or Larger Rollers And With Modified Roller/End Flange Contact
MLOne-Piece Form-Turned Window-Type Brass Cage, Inner Or Outer Ring Centered
C4Bearing Internal Clearance Greater Than C3
VA305Combination Of VA301 (Bearing For Railway Vehicle Traction Motors) And Special Inspection Routines
Descrição do produto
The NU2324ECML/C4VA305 SKF is a single-row cylindrical roller bearing with cage. This bearing consists of a solid inner and outer ring with cylindrical rollers in a cage. This cage prevents contact between the cylinder rollers, so this bearing type can support higher speeds than full-complement cylinder roller bearings. Also, single-row cylindrical roller bearings with cages are very rigid and they can take high radial forces. As the inner and outer rings of these bearings can be easily disassembled, they are very easy to install. Applications of single-row cylindrical roller bearings include gearboxes, agricultural machinery, pumps, compressors, and electric motors.
The NU2324ECML/C4VA305 SKF is a single-row cylindrical bearing with NU design. The outer ring of this bearing has two rigid ribs, while the inner ring has none. As a result, NU bearings are only capable of supporting radial forces. This bearing type is commonly used as a floating bearing. Floating bearings allow axial displacement of the shaft relative to the housing in both directions. This is necessary in applications where the shaft material shrinks or expands due to temperature changes (thermal expansion). NU bearings can also be used as support bearings by combining them with HJ angle rings (available separately). Support bearings can support radial forces and also axial forces in a single direction.
Iniciar sessão
Bem-vindo, novamente! Pode iniciar sessão com a sua conta ABF.
