Pedidos feitos antes das 18h CET serão enviados hoje
Pagamento por fatura possível
Rastreie seu pedido com rastreamento
Distribuidor oficial da Schaeffler
A carregar equivalentes
Especificações
Disponibilidade4 unid.
MarcaFAG
Número do artigoNU1072-MPAX-J30PC FAG
Manufacturer Part Number0777249090000
Também conhecido como
NU1072-M1A
NU1072-MPAX
EAN4054369554724
CategoriaRolamento de rolos cilíndricos
Peso e dimensões
Interno (d) mm
360
Externo (D) mm
540
Largura (B) mm
82
Interno (d) polegadas
14.1732
Externo (D) polegadas
21.2598
Largura (B) polegadas
3.2283
Peso (kg)
67.5
Características do produto
Furo
C - furo cilíndrico
Vedação
Sem vedação
Tipo de gaiola
MA - gaiola de latão, guiada no anel externo
Modificação externa
Sem modificação externa
Folga radial interna
Folga radial interna normal - Cn
Precisão
Durotect B Coating
Estabilização térmica
Sem estabilização térmica - temperaturaa até 120 °C
Descrição do sufixo
MPAXRib-Guided Single-Piece Solid Brass Cage Is A Further Development Of FAG Cage Types MPA And MP1A And Will Replace These Types Successively. It Has Greater Durability With Regard To Shock Loads And Vibrations Than It's Predecessors And It's Especially Well Suited For Applications Involving High Loads
J30PCRings And Rolling Elements With Black Oxide Coating (Durotect B)
Descrição do produto
The NU1072-MPAX-J30PC FAG is a single-row cylindrical roller bearing with cage. This bearing consists of a solid inner and outer ring with cylindrical rollers in a cage. This cage prevents contact between the cylinder rollers, so this bearing type can support higher speeds than full-complement cylinder roller bearings. Also, single-row cylindrical roller bearings with cages are very rigid and they can take high radial forces. As the inner and outer rings of these bearings can be easily disassembled, they are very easy to install. Applications of single-row cylindrical roller bearings include gearboxes, agricultural machinery, pumps, compressors, and electric motors.
The NU1072-MPAX-J30PC FAG is a single-row cylindrical bearing with NU design. The outer ring of this bearing has two rigid ribs, while the inner ring has none. As a result, NU bearings are only capable of supporting radial forces. This bearing type is commonly used as a floating bearing. Floating bearings allow axial displacement of the shaft relative to the housing in both directions. This is necessary in applications where the shaft material shrinks or expands due to temperature changes (thermal expansion). NU bearings can also be used as support bearings by combining them with HJ angle rings (available separately). Support bearings can support radial forces and also axial forces in a single direction.
Iniciar sessão
Bem-vindo, novamente! Pode iniciar sessão com a sua conta ABF.
