Pedidos feitos antes das 18h CET serão enviados hoje
Pagamento por fatura possível
Rastreie seu pedido com rastreamento
A carregar equivalentes
Especificações
Disponibilidade1 unid.
MarcaSKF
Número do artigoNJ320ECML/C3 SKF
EAN7316571353944
CategoriaRolamento de rolos cilíndricos
Peso e dimensões
Interno (d) mm
100
Externo (D) mm
215
Largura (B) mm
47
Interno (d) polegadas
3.937
Externo (D) polegadas
8.4646
Largura (B) polegadas
1.8504
Peso (kg)
8.94
Características do produto
Furo
C - furo cilíndrico
Vedação
Sem vedação
Tipo de gaiola
ML - gaiola de latão, centrada no anel interno ou externo (dependendo do tamanho do rolamento)
Modificação externa
Sem modificação externa
Folga radial interna
Folga radial interna C3 (maior que Cn)
Precisão
Precisão standard
Estabilização térmica
Sem estabilização térmica - temperaturaa até 120 °C
Descrição do sufixo
ECOptimized Internal Design Incorporating More And/Or Larger Rollers And With Modified Roller/End Flange Contact
MLOne-Piece Form-Turned Window-Type Brass Cage, Inner Or Outer Ring Centered
C3Internal Clearance Larger Than Normal
Descrição do produto
The NJ320ECML/C3 SKF is a single-row cylindrical roller bearing with cage. This bearing consists of a solid inner and outer ring with cylindrical rollers in a cage. This cage prevents contact between the cylinder rollers, so this bearing type can support higher speeds than full-complement cylinder roller bearings. Also, single-row cylindrical roller bearings with cages are very rigid and they can take high radial forces. As the inner and outer rings of these bearings can be easily disassembled, they are very easy to install. Applications of single-row cylindrical roller bearings include gearboxes, agricultural machinery, pumps, compressors, and electric motors.
The NJ320ECML/C3 SKF is a single-row cylindrical bearing with NJ design. The outer ring has two rigid ribs, while the inner ring has one rigid rib. As a result, NJ bearings can support radial forces as well as axial forces in a single direction. This bearing type is used as a support bearing. Support bearings allow axial displacement of the shaft relative to the housing in one direction. The shaft is located axially in the other direction. NJ bearings can also be used as locating bearings by combining them with HJ angle rings (available separately). Locating bearings are used to locate a shaft axially in both directions.
Iniciar sessão
Bem-vindo, novamente! Pode iniciar sessão com a sua conta ABF.
