Tipo de gaiola
MA - gaiola de latão, guiada no anel externo
Modificação externa
Sem modificação externa
Folga radial interna
Folga radial interna C3 (maior que Cn)
Precisão
A2 - Reduced Width Tolerance
Estabilização térmica
Sem estabilização térmica - temperaturaa até 120 °C
Descrição do sufixo
EIncreased Load Capacity
M1ASolid Brass Cage, Two-Piece, Rib-Guided On Outer Ring
C3Internal Clearance Larger Than Normal
F59Replaced By
H68Bearing And Bearing Parts For Voith Getriebe KG, Heidenheim; For Special Cage Design, Width Tolerance, Radial Runout And Bearing Clearance See Specifications
Descrição do produto
The NJ2310E.M1A.C3.F59 FAG is a single-row cylindrical roller bearing with cage. This bearing consists of a solid inner and outer ring with cylindrical rollers in a cage. This cage prevents contact between the cylinder rollers, so this bearing type can support higher speeds than full-complement cylinder roller bearings. Also, single-row cylindrical roller bearings with cages are very rigid and they can take high radial forces. As the inner and outer rings of these bearings can be easily disassembled, they are very easy to install. Applications of single-row cylindrical roller bearings include gearboxes, agricultural machinery, pumps, compressors, and electric motors.
The NJ2310E.M1A.C3.F59 FAG is a single-row cylindrical bearing with NJ design. The outer ring has two rigid ribs, while the inner ring has one rigid rib. As a result, NJ bearings can support radial forces as well as axial forces in a single direction. This bearing type is used as a support bearing. Support bearings allow axial displacement of the shaft relative to the housing in one direction. The shaft is located axially in the other direction. NJ bearings can also be used as locating bearings by combining them with HJ angle rings (available separately). Locating bearings are used to locate a shaft axially in both directions.
Iniciar sessão
Bem-vindo, novamente! Pode iniciar sessão com a sua conta ABF.
