Name: GIKR6-PW-A INA
Brand: INA

Especificações

Disponibilidade 74 unid.
Marca INA
Número do artigo GIKR6-PW-A INA
Manufacturer Part Number 0066350910000
EAN 4012802526202
Categoria Terminais de rótula

Peso e dimensões

Interno (d) mm 6
Externo (D) mm 20
Largura (B) mm 9
Interno (d) polegadas 0.2362
Externo (D) polegadas 0.7874
Largura (B) polegadas 0.3543
Peso (kg) 0.0256

Características do produto

Vedação Sem vedação
Material de contato Aço sobre PTFE

Dados da Schaeffler (medias)

Diâmetro externo do rolamento (D) mm 16
Fator de carga radial estática C0r (N) 7990
Largura do anel interno (B) mm 9
Fator de carga radial dinâmica Cr (N) 7750
Fator de carga estática básica, radial (C 0r) "7990.0000"
Número ECLASS 23-05-01-05
Número ECLASS2 23-05-01-05
Descrição do Medias Rod end with internal thread, right hand thread, maintenance-free, sliding layer: PTFE film brass outer ring, DIN ISO 12240-4, dimension series K, type F, open design

Descrição do sufixo

PW Sliding Contact Surface Steel/PTFE (Polyetrafluoroethylene) Bronze Film
A The Significance Of This Sign Is Not Determined Separately. They Are In Need For Appointment Of Special Features Of The Construction Of Internal Form External Uses. In General, The Use These Only Temporarily, During A Transitional Time To Avoid Confusion. In Some Cases, They Also For Permanent Appointment Of Bearings And Parts Of The Same Type And Size, But With A Differ Interior Design. (Source: Ina-Catalogue No. 307)

Transferências e Links

Link to manufacturer

Descrição do produto

The GIKR6-PW-A INA is a rod end. Rod ends consist of a housing with integral shank and a spherical plain bearing. This plain bearing is composed of an inner and outer ring without rolling elements. Rod ends are often mounted on the end of hydraulic or pneumatic cylinders. They are also used to connect two shafts. Rod ends can accommodate misalignment, and they support radial forces in a tensile or compressive direction.

The GIKR6-PW-A INA has a spherical plain bearing with a steel-on-PTFE sliding contact, making it maintenance-free. PTFE is a special plastic. During the run-in period of these plain bearings, particles of PTFE are deposited on the opposite running surface. They fill in the small irregularities of the inner ring surface, creating a smooth surface. As a result, the components fit each other perfectly.

GIKR6-PW-A INA

Rod end