Pedidos feitos antes das 18h CET serão enviados hoje
Pagamento por fatura possível
Rastreie seu pedido com rastreamento
Distribuidor oficial da Schaeffler
A carregar equivalentes
Especificações
Disponibilidade11 unid.
MarcaINA
Número do artigoGIKL14-PB-A INA
Manufacturer Part Number0066395340000
EAN4012802527803
CategoriaTerminais de rótula
Peso e dimensões
Interno (d) mm
14
Externo (D) mm
36
Largura (B) mm
19
Interno (d) polegadas
0.5512
Externo (D) polegadas
1.4173
Largura (B) polegadas
0.748
Peso (kg)
0.16
Características do produto
Vedação
Sem vedação
Material de contato
Aço sobre bronze
Dados da Schaeffler (medias)
Diâmetro externo do rolamento (D) mm
28
Fator de carga radial estática C0r (N)
32000
Largura do anel interno (B) mm
19
Fator de carga radial dinâmica Cr (N)
17000
Fator de carga estática básica, radial (C 0r)
"32000.0000"
Número ECLASS
23-05-01-05
Número ECLASS2
23-05-01-05
Descrição do Medias
Rod end with internal thread, left hand thread, requiring maintenance, DIN ISO 12240-4. dimension series K, type F, open design
Descrição do sufixo
PBSliding Contact Surface Is Steel/Bronze
AThe Significance Of This Sign Is Not Determined Separately. They Are In Need For Appointment Of Special Features Of The Construction Of Internal Form External Uses. In General, The Use These Only Temporarily, During A Transitional Time To Avoid Confusion. In Some Cases, They Also For Permanent Appointment Of Bearings And Parts Of The Same Type And Size, But With A Differ Interior Design. (Source: Ina-Catalogue No. 307)
The GIKL14-PB-A INA is a rod end. Rod ends consist of a housing with integral shank and a spherical plain bearing. This plain bearing is composed of an inner and outer ring without rolling elements. Rod ends are often mounted on the end of hydraulic or pneumatic cylinders. They are also used to connect two shafts. Rod ends can accommodate misalignment, and they support radial forces in a tensile or compressive direction.
The GIKL14-PB-A INA has a spherical plain bearing with a steel-on-bronze sliding contact. The steel inner ring contacts the bronze surface of the outer ring. The steel-on-bronze sliding contact makes this bearing highly wear-resistant, providing low friction. However, the load capacity is slightly lower compared to spherical plain bearings with steel-on-steel sliding contacts. This bearing needs regular maintenance. Proper lubrication is required to reduce friction and prevent fouling and corrosion.
Iniciar sessão
Bem-vindo, novamente! Pode iniciar sessão com a sua conta ABF.