Name: GIHRK40-DO-B INA
Brand: INA

Especificações

Disponibilidade 13 unid.
Marca INA
Número do artigo GIHRK40-DO-B INA
Manufacturer Part Number 0066347610000
Também conhecido como SIR40ES
TAPR40U
EAN 4012802525755
Categoria Terminais de rótula

Peso e dimensões

Interno (d) mm 40
Externo (D) mm 95
Largura (B) mm 28
Interno (d) polegadas 1.5748
Externo (D) polegadas 3.7402
Largura (B) polegadas 1.1024
Peso (kg) 2

Características do produto

Vedação Sem vedação
Material de contato Aço sobre aço

Dados da Schaeffler (medias)

Folga radial (G r) 0,043 - 0,12
Diâmetro externo do rolamento (D) mm 62
Fator de carga radial estática C0r (N) 228000
Fator de carga radial dinâmica Cr (N) 99100
Fator de carga estática básica, radial (C 0r) "228000.0000"
Número ECLASS 23-05-01-05
Número ECLASS2 23-05-01-05
Descrição do Medias Hydraulic rod end, with thread clamping device, right hand thread, requiring maintenance, sliding contact surface: steel/steel, open design

Descrição do sufixo

DO Sliding Contact Surface Steel/Steel
B The Significance Of This Sign Is Not Determined Separately. They Are In Need For Appointment Of Special Features Of The Construction Of Internal Form External Uses. In General, The Use These Only Temporarily, During A Transitional Time To Avoid Confusion. In Some Cases, They Also For Permanent Appointment Of Bearings And Parts Of The Same Type And Size, But With A Differ Interior Design. (Source: Ina-Catalogue No. 307)

Transferências e Links

Link to manufacturer

Descrição do produto

The GIHRK40-DO-B INA is a rod end. Rod ends consist of a housing with integral shank and a spherical plain bearing. This plain bearing is composed of an inner and outer ring without rolling elements. Rod ends are often mounted on the end of hydraulic or pneumatic cylinders. They are also used to connect two shafts. Rod ends can accommodate misalignment, and they support radial forces in a tensile or compressive direction.

The GIHRK40-DO-B INA has a spherical plain bearing with a steel-on-steel sliding contact. Both the outer and inner rings of this bearing are made of steel. Bearings with steel-on-steel sliding contacts are wear-resistant and have a high load carrying capacity. This bearing type requires regular maintenance. Proper lubrication is required to reduce friction and prevent fouling and corrosion.

GIHRK40-DO-B INA

Rod end