Name: GIHNRK32-LO-B INA
Brand: INA

Especificações

Disponibilidade 21 unid.
Marca INA
Número do artigo GIHNRK32-LO-B INA
Manufacturer Part Number 0066331370000
Também conhecido como SIQG32ES
TAPR32CE
EAN 4012802523898
Categoria Terminais de rótula

Peso e dimensões

Interno (d) mm 32
Externo (D) mm 71
Largura (B) mm 32
Interno (d) polegadas 1.2598
Externo (D) polegadas 2.7953
Largura (B) polegadas 1.2598
Peso (kg) 1.05

Características do produto

Vedação Sem vedação
Material de contato Aço sobre aço

Dados da Schaeffler (medias)

Folga radial (G r) 0,037 - 0,1
Diâmetro externo do rolamento (D) mm 52
Fator de carga radial estática C0r (N) 98800
Fator de carga radial dinâmica Cr (N) 67300
Fator de carga estática básica, radial (C 0r) "98800.0000"
Número ECLASS 23-05-01-05
Número ECLASS2 23-05-01-05
Descrição do Medias Hydraulic rod end, with thread clamping device, right hand thread, requiring maintenance, sliding contact surface: steel/steel, DIN 24338 ISO 6982, open design

Descrição do sufixo

LO Sliding Contact Surface Is Steel/Steel, Inner Ring Extended On Both Sides, Single Axial Split In Outer Ring
B The Significance Of This Sign Is Not Determined Separately. They Are In Need For Appointment Of Special Features Of The Construction Of Internal Form External Uses. In General, The Use These Only Temporarily, During A Transitional Time To Avoid Confusion. In Some Cases, They Also For Permanent Appointment Of Bearings And Parts Of The Same Type And Size, But With A Differ Interior Design. (Source: Ina-Catalogue No. 307)

Transferências e Links

Link to manufacturer

Descrição do produto

The GIHNRK32-LO-B INA is a rod end. Rod ends consist of a housing with integral shank and a spherical plain bearing. This plain bearing is composed of an inner and outer ring without rolling elements. Rod ends are often mounted on the end of hydraulic or pneumatic cylinders. They are also used to connect two shafts. Rod ends can accommodate misalignment, and they support radial forces in a tensile or compressive direction.

The GIHNRK32-LO-B INA has a spherical plain bearing with a steel-on-steel sliding contact. Both the outer and inner rings of this bearing are made of steel. Bearings with steel-on-steel sliding contacts are wear-resistant and have a high load carrying capacity. This bearing type requires regular maintenance. Proper lubrication is required to reduce friction and prevent fouling and corrosion.

GIHNRK32-LO-B INA

Rod end