Pedidos feitos antes das 18h CET serão enviados hoje
Pagamento por fatura possível
Rastreie seu pedido com rastreamento
Distribuidor oficial da Schaeffler
A carregar equivalentes
Especificações
Disponibilidade1 unid.
MarcaINA
Número do artigoGAR80-UK-2RS-A INA
Manufacturer Part Number0066465060000
Também conhecido como
SAA80TXE-2RS
EAN4012802529029
CategoriaTerminais de rótula
Peso e dimensões
Interno (d) mm
80
Externo (D) mm
180
Largura (B) mm
55
Interno (d) polegadas
3.1496
Externo (D) polegadas
7.0866
Largura (B) polegadas
2.1654
Peso (kg)
12
Características do produto
Vedação
2RS - vedação de borracha em ambos os lados
Material de contato
Aço sobre PTFE
Dados da Schaeffler (medias)
Diâmetro externo do rolamento (D) mm
120
Diâmetro do olho externo (d 2) mm
180
Fator de carga radial estática C0r (N)
690000
Largura do anel interno (B) mm
55
Fator de carga radial dinâmica Cr (N)
1130000
Fator de carga estática básica, radial (C 0r)
"690000.0000"
Comprimento total da rosca externa da haste (l 2) mm
360
Número ECLASS
23-05-01-05
Número ECLASS2
23-05-01-05
Descrição do Medias
Rod end with external thread, right hand thread, maintenance-free, sliding layer: ELGOGLIDE DIN ISO 12240-4, dimension series E, type M, inner ring curved surface with hard chromium coating, sealed
Descrição do sufixo
UKSliding Contact Surface Hard Chromium/PTFE Composite
2RSLip Seals On Both Sides
AThe Significance Of This Sign Is Not Determined Separately. They Are In Need For Appointment Of Special Features Of The Construction Of Internal Form External Uses. In General, The Use These Only Temporarily, During A Transitional Time To Avoid Confusion. In Some Cases, They Also For Permanent Appointment Of Bearings And Parts Of The Same Type And Size, But With A Differ Interior Design. (Source: Ina-Catalogue No. 307)
The GAR80-UK-2RS-A INA is a rod end. Rod ends consist of a housing with integral shank and a spherical plain bearing. This plain bearing is composed of an inner and outer ring without rolling elements. Rod ends are often mounted on the end of hydraulic or pneumatic cylinders. They are also used to connect two shafts. Rod ends can accommodate misalignment, and they support radial forces in a tensile or compressive direction.
The GAR80-UK-2RS-A INA has a spherical plain bearing with a steel-on-PTFE sliding contact, making it maintenance-free. PTFE is a special plastic. During the run-in period of these plain bearings, particles of PTFE are deposited on the opposite running surface. They fill in the small irregularities of the inner ring surface, creating a smooth surface. As a result, the components fit each other perfectly.
Iniciar sessão
Bem-vindo, novamente! Pode iniciar sessão com a sua conta ABF.
