Name: GAR60-UK-2RS-A INA
Brand: INA

Especificações

Disponibilidade 10 unid.
Marca INA
Número do artigo GAR60-UK-2RS-A INA
Manufacturer Part Number 0066459250000
Também conhecido como SAA60TXE-2RS
EAN 4012802528961
Categoria Terminais de rótula

Peso e dimensões

Interno (d) mm 60
Externo (D) mm 135
Largura (B) mm 44
Interno (d) polegadas 2.3622
Externo (D) polegadas 5.315
Largura (B) polegadas 1.7323
Peso (kg) 6.12

Características do produto

Vedação 2RS - vedação de borracha em ambos os lados
Material de contato Aço sobre PTFE

Dados da Schaeffler (medias)

Diâmetro externo do rolamento (D) mm 90
Diâmetro do olho externo (d 2) mm 135
Fator de carga radial estática C0r (N) 485000
Largura do anel interno (B) mm 44
Fator de carga radial dinâmica Cr (N) 691000
Fator de carga estática básica, radial (C 0r) "485000.0000"
Comprimento total da rosca externa da haste (l 2) mm 277,5
Número ECLASS 23-05-01-05
Número ECLASS2 23-05-01-05
Descrição do Medias Rod end with external thread, right hand thread, maintenance-free, sliding layer: ELGOGLIDE DIN ISO 12240-4, dimension series E, type M, inner ring curved surface with hard chromium coating, sealed

Descrição do sufixo

UK Sliding Contact Surface Hard Chromium/PTFE Composite
2RS Lip Seals On Both Sides
A The Significance Of This Sign Is Not Determined Separately. They Are In Need For Appointment Of Special Features Of The Construction Of Internal Form External Uses. In General, The Use These Only Temporarily, During A Transitional Time To Avoid Confusion. In Some Cases, They Also For Permanent Appointment Of Bearings And Parts Of The Same Type And Size, But With A Differ Interior Design. (Source: Ina-Catalogue No. 307)

Transferências e Links

Link to manufacturer

Descrição do produto

The GAR60-UK-2RS-A INA is a rod end. Rod ends consist of a housing with integral shank and a spherical plain bearing. This plain bearing is composed of an inner and outer ring without rolling elements. Rod ends are often mounted on the end of hydraulic or pneumatic cylinders. They are also used to connect two shafts. Rod ends can accommodate misalignment, and they support radial forces in a tensile or compressive direction.

The GAR60-UK-2RS-A INA has a spherical plain bearing with a steel-on-PTFE sliding contact, making it maintenance-free. PTFE is a special plastic. During the run-in period of these plain bearings, particles of PTFE are deposited on the opposite running surface. They fill in the small irregularities of the inner ring surface, creating a smooth surface. As a result, the components fit each other perfectly.

GAR60-UK-2RS-A INA

Rod end