Name: GAKL10-PB-A INA
Brand: INA

Especificações

Disponibilidade 21 unid.
Marca INA
Número do artigo GAKL10-PB-A INA
Manufacturer Part Number 0066333070000
EAN 4012802523959
Categoria Terminais de rótula

Peso e dimensões

Interno (d) mm 10
Externo (D) mm 29
Largura (B) mm 14
Interno (d) polegadas 0.3937
Externo (D) polegadas 1.1417
Largura (B) polegadas 0.5512
Peso (kg) 0.054

Características do produto

Vedação Sem vedação
Material de contato Aço sobre bronze

Dados da Schaeffler (medias)

Diâmetro externo do rolamento (D) mm 22
Fator de carga radial estática C0r (N) 18500
Largura do anel interno (B) mm 14
Fator de carga radial dinâmica Cr (N) 10000
Fator de carga estática básica, radial (C 0r) "18500.0000"
Número ECLASS 23-05-01-05
Número ECLASS2 23-05-01-05
Descrição do Medias Rod end with external thread, left hand thread, requiring maintenance, sliding contact surface: steel/bronze, DIN ISO 12240-4, dimension series K, type M, open design

Descrição do sufixo

PB Sliding Contact Surface Is Steel/Bronze
A The Significance Of This Sign Is Not Determined Separately. They Are In Need For Appointment Of Special Features Of The Construction Of Internal Form External Uses. In General, The Use These Only Temporarily, During A Transitional Time To Avoid Confusion. In Some Cases, They Also For Permanent Appointment Of Bearings And Parts Of The Same Type And Size, But With A Differ Interior Design. (Source: Ina-Catalogue No. 307)

Transferências e Links

Link to manufacturer

Descrição do produto

The GAKL10-PB-A INA is a rod end. Rod ends consist of a housing with integral shank and a spherical plain bearing. This plain bearing is composed of an inner and outer ring without rolling elements. Rod ends are often mounted on the end of hydraulic or pneumatic cylinders. They are also used to connect two shafts. Rod ends can accommodate misalignment, and they support radial forces in a tensile or compressive direction.

The GAKL10-PB-A INA has a spherical plain bearing with a steel-on-bronze sliding contact. The steel inner ring contacts the bronze surface of the outer ring. The steel-on-bronze sliding contact makes this bearing highly wear-resistant, providing low friction. However, the load capacity is slightly lower compared to spherical plain bearings with steel-on-steel sliding contacts. This bearing needs regular maintenance. Proper lubrication is required to reduce friction and prevent fouling and corrosion.

GAKL10-PB-A INA

Rod end