CategoriaRolamento axial de esferas de escora simples
Peso e dimensões
Interno (d) mm
440
Externo (D) mm
540
Largura (B) mm
80
Interno (d) polegadas
17.3228
Externo (D) polegadas
21.2598
Largura (B) polegadas
3.1496
Peso (kg)
42
Características do produto
Tipo de gaiola
M - gaiola de latão
Precisão
Precisão P5 (maior que p6)
Dados da Schaeffler (medias)
Diâmetro externo da arruela do alojamento (D) mm
540
Fator de carga dinâmica básica, axial (C a)
530000
Altura (T) mm
80
Fator de carga estática básica, axial (C 0a)
3000000
Velocidade limite (n G)
900
Velocidade de referência (n ϑr)
740
Descrição do sufixo
MPSolid Brass Window Cage, Ball Guided
P5Dimensional And Running Accuracy To ISO Tolerance Class 5
Descrição do produto
The 51188-MP-P5 FAG belongs to the single direction thrust ball bearings, also called ball thrust bearings or axial deep groove ball bearings. These bearings consist of a shaft ring, a housing ring and a ball and cage assembly. Thrust ball bearings have an open design. The balls make them suitable for high rotational speeds.
Single direction thrust ball bearings can only be loaded axially in one direction. A shaft can be locked in one direction this way. Radially, they must not be loaded. The shaft ring is attached to the shaft. This ring rotates along with the shaft. The housing ring has a slightly larger bore diameter, allowing the shaft to pass with some clearance.
As thrust ball bearings can be disassembled, the components can easily be mounted separately. Be careful not to mix up the shaft and housing ring when you are assembling the bearing. The housing ring of the 51188-MP-P5 FAG has a flat seat. As a result, this bearing cannot compensate for any misalignment between the shaft and housing.
Iniciar sessão
Bem-vindo, novamente! Pode iniciar sessão com a sua conta ABF.
