Folga radial interna
Folga radial interna C4 (maior que C3)
Precisão
A2 - Reduced Width Tolerance
Lubrificação
Lubrificação standard
Estabilização térmica
Sem estabilização térmica - temperaturaa até 120 °C
Dados da Schaeffler (medias)
Largura (b) mm
24
Fator de carga radial estática C0r (N)
6600
Fator de carga radial dinâmica Cr (N)
25000
Fator de carga estática básica, radial (C 0r)
"6600.0000"
Velocidade limite (n G)
18300
Velocidade de referência (n ϑr)
11900
Número ECLASS
23-05-08-06
Número ECLASS2
23-05-08-06
Descrição do Medias
Self-aligning ball bearing 23..-M
Descrição do sufixo
MSolid Brass Cage, Ball-Guided
F59Replaced By
H68Bearing And Bearing Parts For Voith Getriebe KG, Heidenheim; For Special Cage Design, Width Tolerance, Radial Runout And Bearing Clearance See Specifications
The 2305-M-F59-C4 FAG belongs to the group of double-row self-aligning deep-groove ball bearings. This bearing type without a seal is a double-row bearing. Both rows are housed in a spherical raceway in the outer ring. This construction allows the bearing to be self-aligning. This means that any misalignment of the shaft relative to the bearing housing does not adversely affect performance.
These features make the 2305-M-F59-C4 FAG highly suitable for applications where substantial misalignment or shaft deflections may occur. Also, self-aligning bearings have the lowest friction of all rolling-element bearings. Even at higher speeds, there is only limited frictional heat. These bearings are capable of handling high radial loads. To a lesser extent, they can be axially loaded in both directions.
Iniciar sessão
Bem-vindo, novamente! Pode iniciar sessão com a sua conta ABF.
