Ook bekend als
LSL192330-A-C3
LSL192330-B-C3
LSL192330-TB-C3
EAN4054363034581
CategorieEenrijig cilinderrollager
Gewicht en afmetingen
Binnenmaat (d) mm
150
Buitenmaat (D) mm
320
Breedte (B) mm
108
Binnenmaat (d) inch
5.9055
Buitenmaat (D) inch
12.5984
Breedte (B) inch
4.252
Gewicht (kg)
40.7
Producteigenschappen
Boring
C - cilindrische boring
Afdichting
Geen afdichting
Type kooi
S - stalen of standaard kooi
Externe aanpassing
Geen Externe Aanpassing
Interne radiale speling
C3 interne speling (hoger dan Cn)
Precisie
BR - Black Finishing
Warmtestabilisatie
Geen warmtestabilisatie - temperaturen tot 120 °C
Data van Schaeffler (medias)
ECLASS number
23-05-09-01
ECLASS2 number
23-05-09-01
Suffix-omschrijving
TBIn The Case Of Bearings Of TB Design, The Axial Load Carrying Capacity Of Cylindrical Roller Bearings Was Significantly Improved With The Aid Of New Calculation And Manufacturing Methods. Optimum Contact Conditions Between The Roller And Rib Are Ensured By Means Of A Special Curvature Of The Roller End Faces. As A Result, The Axial Contact Pressures On The Rib Are Significantly Minimised And A Lubricant Film Capable Of Supporting Higher Loads Is Formed. Under Normal Operating Conditions, Wear And Fatigue At The Rib Contact Running And Roller End Faces Is Completely Eliminated. In Addition, Axial Frictional Torque Is Reduced By Up To 50%. The Bearing Temperature During Operation Is Therefore Significantly Lower
BRBlack Finished, Factory-Applied Durotect® B Black-Oxide Coating. Durotect B Improves Run-In Behavior And Energy Efficiency While Reducing Surface-Induced Damage To The Bearing, Burnished Race
