Numero articoloSL1818/530-E-TB-BR-SP5-CN/3L-IT INA
CategoriaFila singola di rulli cilindrici
Peso e dimensioni
Interno (d) MM
530
Esterno (D) mm
650
Larghezza (B) MM
56
Interno (d) pollici
20.8661
Esterno (D) pollici
25.5906
Larghezza (B) pollici
2.2047
Peso (kg)
38.5
Proprietà del prodotto
Foro
C - Foro cilindrico
Tenuta
Nessuna tenuta
Tipo di gabbia
FC - Equipaggiamento completo, nessuna gabbia
Modifica esterna
Nessun Modifica Esterna
Gioco interno radiale
Lower Half of Normal Clearance
Precisione
P5 Precisione (maggiore di P6)
Stabilizzazione termica
Nessuna stabilizzazione termica - Temperature fino a 120 °C
Descrizione del suffisso
EIncreased Load Capacity
TBIn The Case Of Bearings Of TB Design, The Axial Load Carrying Capacity Of Cylindrical Roller Bearings Was Significantly Improved With The Aid Of New Calculation And Manufacturing Methods. Optimum Contact Conditions Between The Roller And Rib Are Ensured By Means Of A Special Curvature Of The Roller End Faces. As A Result, The Axial Contact Pressures On The Rib Are Significantly Minimised And A Lubricant Film Capable Of Supporting Higher Loads Is Formed. Under Normal Operating Conditions, Wear And Fatigue At The Rib Contact Running And Roller End Faces Is Completely Eliminated. In Addition, Axial Frictional Torque Is Reduced By Up To 50%. The Bearing Temperature During Operation Is Therefore Significantly Lower
BRBlack Finished, Factory-Applied Durotect® B Black-Oxide Coating. Durotect B Improves Run-In Behavior And Energy Efficiency While Reducing Surface-Induced Damage To The Bearing, Burnished Race
SP5Increased Accuracy (Partly P5)
CN/3L
CNNormal Radial Internal Clearance
/3LClearance Range Corresponding To The Lower Half Of The Actual Clearance Range
ITInner Ring Mounted Inverted (Turned 180°)
Accesso
Bentornati! Puoi effettuare il login con il tuo account ABF.
