Posibilidad de compra directamente desde el fabricante
Cargando equivalentes
Especificaciones principales
Disponibilidad0 Pzas.
MarcaINA
Número de artículoSL182244-TB-BR-3S INA
Manufacturer Part Number0572455760956
EAN4047643097567
CategoríaRodamiento de varias hileras de rodillos cilíndricos
Peso y dimensiones
Interior (d) mm
220
Exterior (D) mm
400
Ancho (B) mm
108
Interior (d) pulgadas
8.6614
Exterior (D) pulgadas
15.748
Ancho (B) pulgadas
4.252
Peso (kg)
174
Propiedades del producto
Agujero
C - Agujero cilíndrico
Junta
Sin junta
Jaula
FC - Complemento entero, sin jaula
Modificación externa
Sin Modificación Externa
Juego radial interno
Cn Juego interno normal
Precisión
BR + 3S
Estabilización térmica
Sin estabilización térmica - Temperaturas de hasta 120 ºC
Datos de Schaeffler (medias)
ECLASS number
23-05-09-01
ECLASS2 number
23-05-09-01
Descripción del sufijo
TBIn The Case Of Bearings Of TB Design, The Axial Load Carrying Capacity Of Cylindrical Roller Bearings Was Significantly Improved With The Aid Of New Calculation And Manufacturing Methods. Optimum Contact Conditions Between The Roller And Rib Are Ensured By Means Of A Special Curvature Of The Roller End Faces. As A Result, The Axial Contact Pressures On The Rib Are Significantly Minimised And A Lubricant Film Capable Of Supporting Higher Loads Is Formed. Under Normal Operating Conditions, Wear And Fatigue At The Rib Contact Running And Roller End Faces Is Completely Eliminated. In Addition, Axial Frictional Torque Is Reduced By Up To 50%. The Bearing Temperature During Operation Is Therefore Significantly Lower
BRBlack Finished, Factory-Applied Durotect® B Black-Oxide Coating. Durotect B Improves Run-In Behavior And Energy Efficiency While Reducing Surface-Induced Damage To The Bearing, Burnished Race
3SBearings Matched In Set Of Three For Side-By-Side Mounting, Tolerance Is Matched Based On The Inner, Outer And Clearance Of The Bearing
