Posibilidad de compra directamente desde el fabricante
Cargando equivalentes
Especificaciones principales
Disponibilidad0 Pzas.
MarcaINA
Número de artículoSL1818/530-E-TB-N1-IR/T-CN/3L INA
CategoríaRodamiento de una hilera de rodillos cilíndricos
Peso y dimensiones
Interior (d) mm
530
Exterior (D) mm
650
Ancho (B) mm
56
Interior (d) pulgadas
20.8661
Exterior (D) pulgadas
25.5906
Ancho (B) pulgadas
2.2047
Peso (kg)
38.5
Propiedades del producto
Agujero
C - Agujero cilíndrico
Junta
Sin junta
Jaula
FC - Complemento entero, sin jaula
Modificación externa
N1 - 1 Ranura de bloqueo en anillo exterior
Juego radial interno
Lower Half of Normal Clearance
Precisión
Precisión estándar
Estabilización térmica
Sin estabilización térmica - Temperaturas de hasta 120 ºC
Descripción del sufijo
EIncreased Load Capacity
TBIn The Case Of Bearings Of TB Design, The Axial Load Carrying Capacity Of Cylindrical Roller Bearings Was Significantly Improved With The Aid Of New Calculation And Manufacturing Methods. Optimum Contact Conditions Between The Roller And Rib Are Ensured By Means Of A Special Curvature Of The Roller End Faces. As A Result, The Axial Contact Pressures On The Rib Are Significantly Minimised And A Lubricant Film Capable Of Supporting Higher Loads Is Formed. Under Normal Operating Conditions, Wear And Fatigue At The Rib Contact Running And Roller End Faces Is Completely Eliminated. In Addition, Axial Frictional Torque Is Reduced By Up To 50%. The Bearing Temperature During Operation Is Therefore Significantly Lower
N1One Locating Slot (Notch) In One Outer Ring Side Face Or Housing Washer
IR/TGrooves In Inner Ring Are On The Side Of The Circlip
CN/3L
CNNormal Radial Internal Clearance. +
/3LClearance Range Corresponding To The Lower Half Of The Actual Clearance Range
Iniciar sesion
¡Bienvenido de nuevo! Puedes acceder con tu cuenta de ABF.
