Item NumberSL1818/560-E-TB-N1-H167C-IR/T-CN/3L INA
CategoryCylindrical Roller Bearing Single Row
Weight and Dimensions
Inner (d) MM
560
Outer (D) MM
680
Width (B) MM
56
Inner (d) Inch
22.0472
Outer (D) Inch
26.7717
Width (B) Inch
2.2047
Weight (kg)
39.9
Product Properties
Bore
C - Cylindrical Bore
Seal
No Seal
Cage Type
FC - Full Complement, No Cage
External Modification
N1 - 1 Locking Groove in Outer Ring
Radial Internal Play
Lower Half Of C3 Range
Precision
Standard Precision
Heat Stabilization
No Heat Stabilization - Temperatures up to 120 °C
Suffix description
EIncreased Load Capacity
TBIn The Case Of Bearings Of TB Design, The Axial Load Carrying Capacity Of Cylindrical Roller Bearings Was Significantly Improved With The Aid Of New Calculation And Manufacturing Methods. Optimum Contact Conditions Between The Roller And Rib Are Ensured By Means Of A Special Curvature Of The Roller End Faces. As A Result, The Axial Contact Pressures On The Rib Are Significantly Minimised And A Lubricant Film Capable Of Supporting Higher Loads Is Formed. Under Normal Operating Conditions, Wear And Fatigue At The Rib Contact Running And Roller End Faces Is Completely Eliminated. In Addition, Axial Frictional Torque Is Reduced By Up To 50%. The Bearing Temperature During Operation Is Therefore Significantly Lower
N1One Locating Slot (Notch) In One Outer Ring Side Face Or Housing Washer
H167CAn Addition For A Specific Customer. Additional Requirements (Can Be Used As Standard)
IR/TGrooves In Inner Ring Are On The Side Of The Circlip
CN/3L
CNNormal Radial Internal Clearance
/3LClearance Range Corresponding To The Lower Half Of The Actual Clearance Range
Login
Welcome back! You can login with your ABF account.