Name: GIR50-DO-2RS INA
Brand: INA

Specifications

Availability 22 pcs
Brand INA
Item Number GIR50-DO-2RS INA
Manufacturer Part Number 0066356440000
Also known as GIR50ES-2RS
SI50ES-2RS
TFI50M
EAN 4012802527070
Category Rod End

Weight and Dimensions

Inner (d) MM 50
Outer (D) MM 114
Width (B) MM 35
Inner (d) Inch 1.9685
Outer (D) Inch 4.4882
Width (B) Inch 1.378
Weight (kg) 3.45

Product Properties

Seal 2RS - Rubber Seal on Two Sides
Contact Material Steel on Steel

Data from Schaeffler (medias)

Outside diameter bearing (D) mm 75
Radial Static Load Rating C0r (N) 314000
Width inner ring (B) mm 35
Radial Dynamic Load Rating Cr (N) 157000
Basic static load rating, radial (C 0r) "314000.0000"
ECLASS number 23-05-01-05
ECLASS2 number 23-05-01-05
Medias description Rod end with internal thread, right hand thread, requiring maintenance, sliding contact surface: steel/steel, DIN ISO 12240-4, dimension series E, type F, sealed

Suffix description

DO Sliding Contact Surface Steel/Steel & Inner And Outer Ring Hardened
2RS Lip Seals On Both Sides

Downloads & Links

Link to manufacturer

Product description

The GIR50-DO-2RS INA is a rod end. Rod ends consist of a housing with integral shank and a spherical plain bearing. This plain bearing is composed of an inner and outer ring without rolling elements. Rod ends are often mounted on the end of hydraulic or pneumatic cylinders. They are also used to connect two shafts. Rod ends can accommodate misalignment, and they support radial forces in a tensile or compressive direction.

The GIR50-DO-2RS INA has a spherical plain bearing with a steel-on-steel sliding contact. Both the outer and inner rings of this bearing are made of steel. Bearings with steel-on-steel sliding contacts are wear-resistant and have a high load carrying capacity. This bearing type requires regular maintenance. Proper lubrication is required to reduce friction and prevent fouling and corrosion.

GIR50-DO-2RS INA

Rod end