Also known as
GIL50ES-2RS
SIL50ES-2RS
SILA50ES-2RS
CategoryRod End
Weight and Dimensions
Inner (d) MM
50
Outer (D) MM
114
Width (B) MM
35
Inner (d) Inch
1.9685
Outer (D) Inch
4.4882
Width (B) Inch
1.378
Weight (kg)
3.55
Product Properties
Seal
2RS - Rubber Seal on Two Sides
Contact Material
Steel on Steel
Suffix description
DOSliding Contact Surface Steel/Steel & Inner And Outer Ring Hardened
2RSLip Seals On Both Sides
Product description
The GIL50-DO-2RS Elges is a rod end. Rod ends consist of a housing with integral shank and a spherical plain bearing. This plain bearing is composed of an inner and outer ring without rolling elements. Rod ends are often mounted on the end of hydraulic or pneumatic cylinders. They are also used to connect two shafts. Rod ends can accommodate misalignment, and they support radial forces in a tensile or compressive direction.
The GIL50-DO-2RS Elges has a spherical plain bearing with a steel-on-steel sliding contact. Both the outer and inner rings of this bearing are made of steel. Bearings with steel-on-steel sliding contacts are wear-resistant and have a high load carrying capacity. This bearing type requires regular maintenance. Proper lubrication is required to reduce friction and prevent fouling and corrosion.
Login
Welcome back! You can login with your ABF account.
