Name: GAL70-UK-2RS-A INA
Brand: INA

Specifications

Availability 6 pcs
Brand INA
Item Number GAL70-UK-2RS-A INA
Manufacturer Part Number 0066465220000
EAN 4012802529043
Category Rod End

Weight and Dimensions

Inner (d) MM 70
Outer (D) MM 162
Width (B) MM 49
Inner (d) Inch 2.7559
Outer (D) Inch 6.378
Width (B) Inch 1.9291
Weight (kg) 8.3

Product Properties

Seal 2RS - Rubber Seal on Two Sides
Contact Material Steel on PTFE

Data from Schaeffler (medias)

Outside diameter bearing (D) mm 105
Outer eye diameter (d 2) mm 160
Radial Static Load Rating C0r (N) 564000
Width inner ring (B) mm 49
Radial Dynamic Load Rating Cr (N) 883000
Basic static load rating, radial (C 0r) "564000.0000"
Total length external thread rod (l 2) mm 315
ECLASS number 23-05-01-05
ECLASS2 number 23-05-01-05
Medias description Rod end with external thread, left hand thread, maintenance-free, sliding layer: ELGOGLIDE, DIN ISO 12240-4, dimension series E, type M, inner ring curved surface with hard chromium coating, sealed

Suffix description

UK Sliding Contact Surface Hard Chromium/PTFE Composite
2RS Lip Seals On Both Sides
A The Significance Of This Sign Is Not Determined Separately. They Are In Need For Appointment Of Special Features Of The Construction Of Internal Form External Uses. In General, The Use These Only Temporarily, During A Transitional Time To Avoid Confusion. In Some Cases, They Also For Permanent Appointment Of Bearings And Parts Of The Same Type And Size, But With A Differ Interior Design. (Source: Ina-Catalogue No. 307)

Downloads & Links

Link to manufacturer

Product description

The GAL70-UK-2RS-A INA is a rod end. Rod ends consist of a housing with integral shank and a spherical plain bearing. This plain bearing is composed of an inner and outer ring without rolling elements. Rod ends are often mounted on the end of hydraulic or pneumatic cylinders. They are also used to connect two shafts. Rod ends can accommodate misalignment, and they support radial forces in a tensile or compressive direction.

The GAL70-UK-2RS-A INA has a spherical plain bearing with a steel-on-PTFE sliding contact, making it maintenance-free. PTFE is a special plastic. During the run-in period of these plain bearings, particles of PTFE are deposited on the opposite running surface. They fill in the small irregularities of the inner ring surface, creating a smooth surface. As a result, the components fit each other perfectly.

GAL70-UK-2RS-A INA

Rod end