Also known as
CF1.1/2SB
CF24PPSK
CR1.1/2XB
CRSB24
S48LW
CategoryCam Follower
Weight and Dimensions
Inner (d) MM
15,88
Outer (D) MM
38,1
Width (B) MM
22,23
Inner (d) Inch
0.625
Outer (D) Inch
1.5
Width (B) Inch
0.875
Weight (kg)
0.225
Product Properties
Seal
2L - LS-seal at Both Sides
Excenterring
Other Mounting Method
Running Surface
Cylindrical
Suffix description
BWith Hexagon Hole
UULip Seals On Both Sides (P Type - Two Zinc-Plated Sheet Steel Washers With Intermediate NBR Part, Seal Lip Axially Preloaded), Temperature Range -30 ~ 100℃. If Letter R Is In The Suffix, Than The Cam Follower Is With Crowned Outer Ring, Otherwise It's A Cylindrical Running Surface (X)
Product description
The CR24BUU Neutral is a cam follower with needle rollers. These rolling elements combine high load capacity with a compact design. Cam followers are designed for use with various types of tracks. Thanks to a thick-walled outer ring, they can withstand high radial loads. Instead of an inner ring, they feature a solid, threaded stud, enabling easy mounting. Axial loads due to alignment errors or misalignment can be absorbed in both directions. They are not mounted in a housing bore, but a flat (counter) track provides support.
The CR24BUU Neutral is equipped with a cage that prevents the rolling elements from coming into contact with each other. This design allows for a controlled movement of the rolling elements. There is lower friction compared to full complement cam followers, allowing for higher rotational speeds and less heat generation. Common applications of cam followers include conveyor systems, linear guidance systems, and cam mechanisms.
Login
Welcome back! You can login with your ABF account.
