Auch bekannt als
LSL192330-A-C3
LSL192330-B-C3
LSL192330-TB-C3
EAN4054363034581
KategorieZylinderrollenlager einreihig
Gewicht und Abmessungen
Innen (d) mm
150
Außen (D) mm
320
Breite (B) mm
108
Innen (d) Zoll
5.9055
Außen (D) Zoll
12.5984
Breite (B) Zoll
4.252
Gewicht (kg)
40.7
Produkteigenschaften
Bohrung
C – Zylindrische Bohrung
Dichtung
Keine Dichtung
Käfigtyp
S – Stahl- oder Standardkäfig
Externe Modifikation
Keine Externe Modifikation
Interne Radialluft
C3 Innenluft (größer als Cn)
Präzision
BR - Black Finishing
Wärmestabilisierung
Keine Wärmestabilisierung - Temperaturen bis 120°C
Angaben von Schaeffler (medias)
ECLASS number
23-05-09-01
ECLASS2 number
23-05-09-01
Suffixbeschreibungen
TBIn The Case Of Bearings Of TB Design, The Axial Load Carrying Capacity Of Cylindrical Roller Bearings Was Significantly Improved With The Aid Of New Calculation And Manufacturing Methods. Optimum Contact Conditions Between The Roller And Rib Are Ensured By Means Of A Special Curvature Of The Roller End Faces. As A Result, The Axial Contact Pressures On The Rib Are Significantly Minimised And A Lubricant Film Capable Of Supporting Higher Loads Is Formed. Under Normal Operating Conditions, Wear And Fatigue At The Rib Contact Running And Roller End Faces Is Completely Eliminated. In Addition, Axial Frictional Torque Is Reduced By Up To 50%. The Bearing Temperature During Operation Is Therefore Significantly Lower
BRBlack Finished, Factory-Applied Durotect® B Black-Oxide Coating. Durotect B Improves Run-In Behavior And Energy Efficiency While Reducing Surface-Induced Damage To The Bearing, Burnished Race
